Structural regulation and polishing performance of dendritic mesoporous silica (D-mSiO2) supported with samarium-doped cerium oxide composites

Ceria (CeO₂) particles are prevalent polishing abrasive materials. Trivalent lanthanide ions are the popular category of dopants for enriched surface defects and thus improved physicochemical properties, since they are highly compatible with CeO₂ lattices. Herein, a series of dendritic-like mesoporous silica (D-mSiO₂)-supported samarium (Sm)-doped CeO₂ nanocrystals were synthesized via a facile chemical precipitation method. The relation of the structural characteristics and chemical mechanical polishing (CMP) performances were investigated to explore the effect of Sm-doping amounts on the D-mSiO₂/Sm_xCe_1?xO_2?δ (x = 0–1) composite abrasives. The involved low-modulus D-mSiO₂ cores aimed to eliminate surface scratch and damage, resulting from the optimized contact behavior between abrasives and surfaces. The trivalent cerium (Ce³⁺) and oxygen vacancy (V_O) at CeO₂ surfaces were expected to be reactive sites for the material removal process over SiO₂ films. The optimal oxide-CMP performances in terms of removal efficiency and surface quality were achieved by the 40% Sm-doped composite abrasives. It might be attributed to the high Ce³⁺ and V_O concentrations and the enhancement of tribochemical reactivity between CeO₂SiO₂ interfaces. Furthermore, the relationship between the surface chemistry, polishing performance as well as the actual role in oxide-CMP of the D-mSiO₂/Sm_xCe_1?xO_2?δ abrasives were also discussed.     

Dielectric performance and conductive mechanism of KNN-based ceramics prepared via sol–gel core–shell process

Journal of Materials Science: Materials in Electronics - 0.95(Li0.02Na0.50K0.48)(Nb0.95Sb0.05)O3–0.05AgTaO3@BaZrO3 (LNKNbSAT@BZ) lead-free ceramics were prepared via a sol–gel...     

Zeolitic imidazolate framework-8 modified cathode promotes microbial electrosynthesis from carbon dioxide

Microbial electrosynthesis (MES) is an electrochemical reduction technology through which microorganisms attached to a cathode are driven by electricity to reduce carbon dioxide (CO₂) into industrial chemicals. However, the limited contact time with biocatalysts affects the performance of MES because of low CO₂ solubility. In this study, zeolitic imidazolate framework-8 (ZIF-8) particles with different pore diameters modified cathodes were prepared. Results showed that the ZIF-8 modified electrode obtained the maximum acetate production rate (0.13 g L^?1 d^?1), which was 1.4 times that of bare CF, and the accumulated acetate concentration reached 4.04 ± 0.1 g L^?1 within 30 days. Brunauer–Emmett–Teller test and CO₂ adsorption characteristic evaluation indicated that ZIF-8 had a high specific surface area and an excellent CO₂ adsorption capacity. Scanning electron microscopy and microbial community analysis revealed that ZIF-8 modified electrodes were beneficial to biofilm formation and increased the enrichment of Acetobacterium and Arcobacter. Therefore, CO₂-adsorbing materials modified electrodes are effective in improving the performance of MES.     

Numerical study on laminar burning velocity of ammonia flame with methanol addition

The combustion characteristics of ammonia/methanol mixtures were investigated numerically in this study. Methanol has a dramatic promotive effect on the laminar burning velocity (LBV) of ammonia. Three mechanisms from literature and another four self-developed mechanisms constructed in this study were evaluated using the measured laminar burning velocities of ammonia/methanol mixtures from Wang et al. (Combust.Flame. 2021). Generally, none of the selected mechanisms can precisely predict the measured laminar burning velocities at all conditions. Aiming to develop a simplified and reliable mechanism for ammonia/methanol mixtures, the constructed mechanism utilized NUI Galway mechanism (Combust.Flame. 2016) as methanol sub-mechanism and the Otomo mechanism (Int. J. Hydrogen. Energy. 2018) as ammonia sub-mechanism was optimized and reduced. The reduced mechanism entitled ‘DNO-NH3’, can accurately reproduce the measured laminar burning velocities of ammonia/methanol mixtures under all conditions. A reaction path analysis of the ammonia/methanol mixtures based on the DNO-NH3 mechanism shows that methanol is not directly involved in ammonia oxidation, instead, the produced methyl radicals from methanol oxidization contribute to the dehydrogenation of ammonia. Besides, NO_x emission analysis demonstrates that 60% methanol addition results in the highest NO_x emissions. The most important reactions dominating the NO_x consumption and production are identified in this study.     

Eco-friendly approach for preparation of hybrid silica aerogel via freeze drying method

Journal of Materials Science - In this paper, an eco-friendly method of producing hybrid silica aerogels by freeze-drying method (FD) is proposed. In the freeze-drying system, deionized water was...     

Numerical modelling of conjugate heat and mass transfer during hydrofluidisation food freezing in different water solutions

A novel method of hydrofluidisation food freezing is numerically investigated in this paper. This technique is based on freezing small food products in a liquid medium under highly turbulent flow conditions when the heat transfer coefficient is higher than 1 000 W⋅m⁻²⋅K⁻¹, which depends on the operating and flow conditions. A numerical model was developed to characterise the freezing process in terms of the heat transfer and diffusion of liquid solution components into the food product. The study investigates the freezing process of spherical samples in binary solutions of ethanol (30%) and glycerol (40%) and ternary solution of ethanol and glucose (15%/25%). The developed model was employed to determine the concentration of the liquid solution in food samples and to quantify the effect of sample size, heat transfer coefficient, solution temperature and concentration on the process. The food sample size varied from 5 to 30 mm, and the heat transfer coefficients varied from 1 000 to 4 000 W⋅ m⁻²⋅ K⁻¹. The results confirm that a freezing time of 15 min for 30 mm diameter samples or less than 1 min for 5 mm diameter samples can be achieved with the hydrofluidisation method. The solution uptake was influenced by the solution type, sample size and process parameters and varied from 8.9 to 35 g of solute per kg of product for ethanol-glucose and glycerol solutions, respectively. This paper quantifies the advantages and possible limitations of hydrofluidisation, which has not yet been entirely studied, especially in terms of the mass absorption of different solutes.     

Impact of TiO2 nanoparticles and nanowires on corrosion protection performance of chemically bonded phosphate ceramic coatings

The impact of the addition of TiO₂ nanoparticles and nanowires on the morphology, phase characteristics, contact angle, and electrochemical performance of chemically bonded phosphate ceramic coatings (CBPCs) was investigated. The chemical composition and surface morphology of the TiO₂ nanoparticle and nanowire modified with and without (heptadecafluoro-1,1,2,2-tetradecyl) trimethoxysilane were characterized. Results indicated that the hydrophobic –CF₂– and –CF₃ groups were successfully introduced into the TiO₂ nanoparticles and nanowires after modification. Corrosion resistance of CBPCs with TiO₂ was evidently improved compared with that without TiO₂. Such improvement was mainly due to the combined effects of low surface energy materials and micro/nano structures. In addition, CBPCs with TiO₂ nanowires exhibited higher hydrophobicity and corrosion resistance than those with TiO₂ nanoparticles because of the special columnar structure of the nanowires.